Connecting To Equipment - Strong SRT 5438 User Manual

Connecting to Equipment

How to get good reception
• In general you are not required to change the existing antenna. However if your antenna
is not in good condition you should consider replacing it to ensure uninterrupted digital
television viewing.
• Viewers in areas of poor analog reception may need special advice about antenna
requirements for digital reception in their area.
• It's recommended that viewers use quad shielded cable from the antenna to the
television.
Connections to a TV
There are several ways of connecting this unit to the TV and Hi-Fi System. For high
definition viewing your TV must support 576p, 720p and 1080i resolution. Also the
connection between this unit and TV must be YPbPr component, or HDMI. Other
connection will provide standard definition viewing only.
Warning
Please switch OFF the mains power before plugging or unplugging connection cables,
otherwise, it may damage this unit!
Connect the unit via Audio/CVBS/S-VIDEO
(for standard definition viewing)
1. Connect the antenna with ANT IN of the unit.
2. Connect the RF loop cable via LOOP IN and LOOP OUT.
3. Connect the unit via CVBS/ S-Video/Audio L/R.
8