Basic Operations - Strong SRT 5438 User Manual

Basic Operations

Switch Program
1. Press the NUMERIC keys (0~9) on the remote control to select the desired channel.
2. Press the ▲▼ key on the remote control or CH+/- on the front panel of the unit to change the
available channels upward/downward.
3. Press the RECALL key to view the previous selected channel.
Volume control
1. Press the ◀▶ key on the remote control, front panel or VOL+/- to adjust the volume.
The following volume bar will appear on screen.
Mute
1. Press the MUTE key to temporarily stop the sound.
2. To cancel mute, press the MUTE key again or press◀▶key.
Note: MUTE key is also available in menu /EPG / Program list etc.
Change an audio language and audio mode
Press the AUDIO key on the remote control to select the audio control menu, press the
◀▶,▲▼, OK keys to select an audio language you want. Press EXIT key to exit the
menu.
Note: Available Languages depend on the broadcaster in your region.
Change screen aspect
Press ASPECT key to switch screen aspect mode (16:9 full screen, 16:9 letter box, 4:3 full
screen, 4:3 letter box, Pan Scan).
Change video resolution
Press FORMAT key to set the video resolution mode (1080i, 720P，576P, 576i).
Note: this units default FORMAT is set to 1080i.
Change TV/Radio mode
Press TV/RADIO key to change the program mode between TV and Radio.
Note: The sound will be heard after 5 seconds in the Radio mode.
View program info
1. Press INFO key to view the brief introduction of current program.
2. Press INFO/ EXIT to exit view.
12