Section 3 − Installation; Specifications; Removing Mig Gun From Welding Power Source - Miller Electric Spoolmate 100 Series Owner's Manual

3-1. Specifications

Approximate Wire
Wire Diameter Range
Millermatic 140
AutoSet: 5 To 365 ipm
.030 Thru .035 in.
(0.8 Thru 0.9 mm) (0.13 To 9.27 mpm)
Aluminum Wire Millermatic 140:
Or Flux Cored Wire
(0.13 To 11.05 mpm)
.023 Thru 035 in. Millermatic 180 And
Renegade 180:
(0.6 Thru 0.9 mm) Solid
Wire
(1.65 To 15.88 mpm)

3-2. Removing MIG Gun From Welding Power Source

.
Hold wire tightly to keep it
from unraveling.
Rewind Wire Onto Spool, Fasten
End Of Wire To Spool
SECTION 3 − INSTALLATION
Cooling
Feed Range Method
5 To 435 ipm
Air Cooled
65 To 625 ipm
Cut Off End Of Wire
Maximum Weld Circuit
Spool Size Rating
22.5 Volts, 135
Amperes, 30%
4 in. (102 mm)
Duty Cycle
Diameter
Using Argon
Shielding Gas
Open Pressure Assembly
Knob
Loosen Knob, Disconnect Gun Trigger
Plug, And Pull Gun From Unit
Overall Dimensions Weight
Length:
13 in. (330 mm)
Width:
5.6 lb (2.54 kg)
2-1/4 in. (57 mm)
Gun With Cable
Height:
8 in. (203 mm)
Ref. 802 982-A
OM-234 016 Page 11