Miller Electric Spoolmate 100 Series Owner's Manual page 26

C. Weld Parameter Chart For Millermatic 140 Model w/Factory Set Non-Wire Speed Tracking Mode
Refer to chart below to select Voltage and Wire Speed based on
thickness of material being welded.
1. Number on left of
slash is Voltage
Knob Setting.
(Example: 4.5/55)
Solid Wire
ER70S−6
(DCEP)
Solid Wire
ER70S−6
(DCEP)
Flux Core
E71T−11
(DCEN)
Stainless
Steel
(DCEP)
Selecting Wire, Gas and Control Settings for Aluminum
Aluminum w/
Aluminum
Opt. Spool Gun
4043ER
OM-234 016 Page 22
2. Number on right
of slash is Wire
Speed Knob Setting.
(Example: 4.5 / 55 )
100% Argon
.
Color parameter charts can be downloaded from www. MillerWelds.com or
by ordering from a Miller distributor.
.030" (0.8 mm)
.035" (0.9 mm)