Miller Electric Spoolmate 100 Series Owner's Manual page 29

NOTE: Settings are approximate. Adjust as required.
IMPORTANT:
1.5/20 2/25 2/25
1.5/15 2/20 2/20
2/12 2/15
3.5/25
3/15
3.5/30
3.5/25
with optional Spool Gun, Order part no. 300371
"−−−" Means not recommended.
Thicker materials can be welded using proper technique,
joint preparation and multiple passes.
Match drive roll groove to diameter of wire being used. Set Tension
knob setting to 3 at start. Adjust tension per instructions in the manual.
2.5/30 3/45 3.5/60
3/35
2.5/30 3.5/40 4.5/55 6/75
2.5/20 3/25 3.5/30
3.5/25 4/40 4.5/50
3.5/20
4/25 4.5/35
3/12 4/20 4.5/30
1/15 2/20 3.5/35
1/10 3/25
2/15
2.5/10 3/15
3.5/45 4/50 4.5/70
3.5/28 4/45 5/60
3.5/25 4/40
2.5/20
2/70 2/70 4/70
2.5/65 4/60
.024" (0.6 mm) #220179
.030" (0.8 mm) #220179
.035" (0.9 mm) #220179
.045" (1.2 mm)
4/70 6/100
6/80
4.5/45 6/55 6.5/60 10/70
5/60 7/85
5.5/45 6/55 6.5/65
5.5/35 6/40 6.5/50
4/45 6/65 6.5/75
4/35 7/60
6/55
4/25 6/35 7/40
5/80 6/95
5/70 6/85 7.5/95
4.5/50 6/65 7.5/80
5/70 8/95 10/100
5/65 8/90 10/90
#202926
#202926
#202926
10/95
10/75
10/55
10/65
10/45
225 229−E
225 229-E
OM-234 016 Page 25