Table of Contents
Advertisement
13. USB, Ethernet and Wireless LAN Interface
13-1. USB Interface Specifications
1.
General Specification:
2.
Communication Speed:
3.
Communication Method:
4.
Power Specifications:
5.
Connector:
13-2. Ethernet Interface Specifications
1.
General Specification:
2.
Communication Media:
3.
Communication Speed:
4.
Protocol:
5.
TCP/IP detail:
6.
Connector:
Note: Factory-set login password for administrator
One of the following protocols may be used for changing the settings on this product:
HTTP (web), TELNET, or FTP. To do so, it is necessary to log in using an adminis-
trator account for the product.
Use the following administrator account information on HTTP (web), TELNET, or
FTP.
13-3. Wireless LAN Interface Specifications
1.
General Specification:
2.
Communication Media:
3.
Communication Speed:
4.
Protocol:
5.
TCP/IP detail:
6.
Operating Channels:
Conforms to USB 2.0 Specifications
USB Full Speed Mode (12 Mbps)
USB Bulk Transmission Mode
USB Self-power Function
USB Up-Stream Port Connector (USB Type-B)
Conforms to IEEE802.3
10 Base-T/100 Base-TX
10/100 Mbps
TCP/IP
ARP, RARP, BOOTP, DHCP, LPR, #9100, FTP,
HTTP, TELNET, TFTP
RJ-45 (8-pin modular)
Administrator account name:
Password:
The password may be changed after logging in.
Conforms to IEEE802.1lb
2.4 GHZ DSSS wireless CF card
1M/2M/5.5M/11Mbps AUTO Full-Back
TCP/IP
ARP, RARP, BOOTP, DHCP, LPR, #9100, IPP, POP3,
HTTP, TELNET, SMTP, SNMP, FTP
North America : 1-11 ch
Japan : 1-14 ch
Europe : 1-13 ch
"root" (required)
"public" (required)
– 50 –
Advertisement
Table of Contents
