NordicTrack E 10.7 Elliptical Manual page 13

11. Identify the Right Pedal Arm Cover A (41) and
the Right Pedal Arm Cover B (42) and orient
them as shown.
Attach the Right Pedal Arm Cover B (42) to
the Right Pedal Arm (37) with two M4 x 16mm
Screws (97).
Then, press the Right Pedal Arm Cover A (41)
onto the Right Pedal Arm Cover B (42).
Repeat this step on the other side of the
elliptical.
12. While a second person holds the Console (8)
near the Upright (4), connect the wires on the
Console to the Upper Wire (116) and to the
Pulse Wire (117).
Tip: Avoid pinching the wires. Attach the
Console (8) to the Upright (4) with four M4 x
16mm Screws (97).
11
12
8
117
Avoid pinching
the wires
13
41
97
37
42
116
4
97