NordicTrack Audiostrider Cx650 Elliptical User Manual page 7

4. While another person holds the Upright (10)
near the Frame (1), connect the Upper Wire
Harness (65) to the Lower Wire Harness (64).
Then, insert the Upright (10) into the Frame (1).
Attach the Upright with four M8 x 19mm Button
Screws (85) and four M8 Split Washers (97).
Do not tighten the Button Screws yet.
Avoid pinching the Wire Harnesses (64, 65)
during this step.
5. Orient the Left and Right Upright Covers (19,
20) as shown. Then, attach the Upright Covers
around the Upright (10) with five M4 x 16mm
Round Head Screws (78).
4
10
97
65
64
97
97
85
97
5
78
19
78
7
Avoid pinching the
Wire Harnesses (64, 65)
during this step
85
1
78
20
10