1+0/1+1 Installation - GE HC HP User Manual

1+0/1+1 Installation

This section describes the installation procedure for GE MDS Intrepid-HC HP in a 1+0 or 1+1 configuration.
The components involved in this procedure include the following:
RFU
OCB
Hanger Kit
Pole Mount Kit
Assembling the RFU and OCB
The RFU is generally assembled in the factory with the OCB, and delivered as a single unit.
If the RFU is delivered separately with the OCB, do the following:
Important: The instructions in this guide should be performed indoors.
1. Remove the RFU and the OCB from the box.
2. Make sure that the OCB sealing gasket is in place.
1-4
Filters
OCB
RFU
GE MDS Intrepid-HC HP Installation Guide