GE HC HP User Manual page 82

Management Verification
Install network management software on the PC, and launch the program.
Verify that you can manage the link and that you are able to perform changes to the link configuration
(frequency channel, TX power, system name, time & date, etc.) via NMS.
Verify that the NMS reports the correct parameters when performing the above.
Verify that there are no active alarms on the link.
If the management station is located at a remote site (Network Operation Center), verify that the
management station can manage the link and receive traps.
Loopback Operation
Perform line loopback, IDU loopback, RFU loopback, and Remote loopback, and verify that the system
operates accordingly.
3-8 MDS Intrepid-HC HP Installation and Operation