Table of Contents
Advertisement
Assembling the Pole Mount Kit
The Pole Mount Kit is used to connect the Hanger Kit (together with the RFU and OCB) to the pole.
The kit consists of a single metal plate with a clamp assembly.
Important: The diameter of the pole upon which the kit is mounted must be between 50 mm (2") and
125 mm (5").
To assemble the Pole Mount Kit on the pole:
1. Open the Pole Mount Kit clamp, and assemble the kit on the pole, as shown in the following illustration.
Four Screws
Fastening the
Pole Mount Kit
to the Pole
2. Fasten the kit to the pole using the 4 screws, as shown in the photo above.
GE MDS Intrepid-HC HP Installation Guide
1-7
Advertisement
Table of Contents
