Getting Acquainted With The X; Cross-Fader And Fader Controls; Effect, Menu, Etc. Management - Tascam X-9 Owner's Manual

Cross-fader and fader controls

These take care of the A and B outputs which are
assigned to the cross-fader using the
trols, and then passed to the master stereo output.
It is possible to set the cross-fader curve, reversal,
and allow source starting with the cross-fader.

Effect, menu, etc. management

This section handles the effects, the parameter menus
and the equalization memories of the X-9.
See
"EQ" on page 28, "Effects" on page 23 and
"Menu reference" on page 17 for details.

2 Getting acquainted with the X-9

See
con- the cross-fader fits into the signal chain.
ASSIGN
See
settings.
"Cross-fading" on page 14 for details of how
"Faders" on page 21 for details of cross-fader
TASCAM X-9 Owner's Manual
9