Specifications, Etc; I/O Specifications; Audio I/O; Control I/O - Tascam X-9 Owner's Manual

10 – Specifications, etc.

I/O specifications

Audio I/O

Analog inputs
LINE 1 through LINE 4
Input level
Input impedance
PHONO 1 through PHONO 4
Input level
Input impedance
MIC input
Input level
Input impedance
RETURN ( L , R )
Input level
Input impedance
Analog outputs
MASTER OUTPUT (BALANCED)
Output level
Output impedance
MASTER OUTPUT (UNALANCED) RCA pin (unbalanced)
Output level
Output impedance
BOOTH OUTPUT
Output level
Output impedance
SEND ( L , R )
Output level
Output impedance
PHONES (x 2)
Maximum total output level
Total load impedance
Digital inputs
CH 1, CH 2
Digital output
DIGITAL OUT
a. All XLR connectors are wired 1=ground, 2-live (hot), 3=return (cold)

Control I/O

FADER STOP/START 1 through 4
FOOT SW 1, FOOT SW 2
30
TASCAM X-9 Owner's Manual
RCA pin (unbalanced)
–16 dBV
47 k
RCA pin unbalanced (with additional
–54 dBV
47 k
a
XLR balanced (female)
–55 dBV
2.7 k
1/4" jack (unbalanced)
–10 dBV
22 k
XLR balanced (male) a
+ 4dBu
75
–10 dBV
1 k
RCA pin (unbalanced)
–10 dBV
1 k
1/4" jack (unbalanced)
–10 dBV
1 k
Stereo 1/4" jack
30 mW + 30 mW
32
RCA pin, IEC60958 TYPE I or TYPE II (auto-detect)
RCA pin, IEC60958 TYPE II (SPDIF)
3.5 mm mini-jack (high=5 V, Low (on)=0 V) Tip=PLAY, GND=READY
1/4" jack (for use with RC-30P)
SIGNAL GND connector)