Tascam X-9 Owner's Manual page 19

Function
Program EQ Q
values
Meter release time
Meter peak hold
time
Digital out
Program fader
curve
Program fader
reverse
Sampler tempo
Menu
Meaning
display
11 _ E
Sets the Q value for the
EQ bands of the
selected program (see
"EQ Q setting" on
page 28)
12Mr
Sets the meter release
time (see "Adjusting the
output volume" on
page 16).
13MP
Sets the meter peak
hold time ("Adjusting the
output volume" on
page 16)
14dI
Sets whether the signal
from the digital output is
pre- or post master
fader
15Fc
Sets the fader curve as
described and shown in
"Program fader "curve""
on page 21.
16Fr
Sets the fader direction
to reverse as described
in "Program fader direc-
tion" on page 21.
17St
Sets the sampler play-
back pitch for either
sampler 1 or sampler 2.
Available settings
After pressing ENTER to
select the menu, use the dial to
H
select the band ( =high,
M L
*=mid, =low) and press
ENTER .
A
low value of Q
nOr
Normal value of Q
B
high value of Q
Value changes as selection is
made. Press ENTER to con-
firm.
nor
* Normal
SLO
Slow
All values are in seconds
OFF
0. 5
1. 0
*
2. 0
nOr
* Post-fader signal
rEc
Pre-fader signal
ENTER to
After pressing
select the menu, use the dial to
select the program fader to be
1 2 3 4
set ( , , or ) and press
ENTER .
Select from the following:
A1
–6 dB
nOr
* –12 dB
A2
–24 dB
ENTER to confirm.
Press
ENTER to
After pressing
select the menu, use the dial to
select the program fader to be
1 2 3 4
set ( , , or ) and press
ENTER .
Select:
NOr
* Normal
rEV
Reverse
Press ENTER to confirm.
After pressing ENTER to
select the menu, use the dial to
select the sampler to be set
S1 S2
( *, or ) and press
ENTER .
Use the dial to select the value
100 100
(from - to ) and press
ENTER to confirm.
TASCAM X-9 Owner's Manual
5 Menus
Notes
Use the left menu sys-
tem for programs 1 and
3.
Use the right menu sys-
tem for programs 2 and
4.
Can be performed on
both left and right menu
systems.
Can be performed on
both left and right menu
systems.
Can be performed on
both left and right menu
systems.
Can be performed on
both left and right menu
systems.
Can be performed on
both left and right menu
systems.
Can be performed on
both left and right menu
systems.
When sampler data is
erased, the value is
reset to 0%.
19