Remembering And Recalling Eq Settings - Tascam X-9 Owner's Manual

The left display and controls can be used for pro-
grams 1 and 3, and the right for programs 2 and 4.
Use the selector switches to select the program.
Use the menu controls corresponding to the selector
switch to view the settings for the equalization.

Remembering and recalling EQ settings

The menu system is used to store the EQ settings of
the currently-selected program.
Use either the left or the right menu system for this
function, depending on the program. The left display
and menu system are used for programs 1 and 3, and
the right display and menu system are used for pro-
grams 2 and 4.
Note that the setting has no meaning in
MONITOR
this mode.
When the key is off, and no menu settings
EFFECT
are being made, turn the
DATA
or indicator is lit. The display shows the fre-
LOW
quency currently set for the program.
Turning either the gain or the frequency control for
the band changes the display to either the frequency
or the gain for that band.
See "EQ memory store" on page 18 and "EQ mem-
ory recall" on page 18 about menu functions
10 for an explanation of how these are stored and
recalled to the 100 memory banks.
All memories can be erased using the menu system
(see "Clear all EQ memories" on page 20—
TASCAM X-9 Owner's Manual
9 EQ
knob until the ,
HI MID
09
and
24Ac
)
29