Table of Contents
Advertisement
4 – Learning more
The X-9 has four sets of inputs, as well as the two
built-in samplers and the microphone input, all of
which can be mixed and used as sound sources.
There are a number of different signals that can be
fed into the X-9: up to four turntables, and four other
About programs
These inputs are assigned to four mixer channels
(modules), known as programs, and numbered from
1 through 4, The levels of the programs are con-
trolled using program faders.
Assigning sources to programs
Use the switches on the top panel to change between
the
and
inputs.
LINE
PHONO
In addition, there is a key beside each of these
switches, allowing you to choose different sources
for the programs:
Trim
When the inputs have been assigned,
adjust the level fed to the equalizer, and
then the fader, using the program's
control.
Cross-fading
When the two program sources have been assigned
as shown above ("About programs" on page 14), they
14
TASCAM X-9 Owner's Manual
analog devices, and two digital devices, not to men-
tion the two internal samplers and the microphone.
In order to understand the X-9, it is necessary to get a
basic idea of where the signals go.
In addition, each program is equipped with 3-band
sweppable sweepable EQ, with variable Q, and a trim
control.
The left-right balance of each program is adjusted
using the menu system with
22b4
The keys for programs 1 and 2 allow the digital
inputs to be selected as an alternative to the
LINE
(the digital is selected), the
no effect.
The keys for programs 3 and 4 allow input 2 to be
selected for program 3 and/or input 1 to be selected
for program 4. The meaning of inputs 1 and 2 is
decided by the
and by the digital selection keys.
This provides 38 dB of adjustment. Note that turning
this control too far clockwise with a powerful input
TRIM
signal may result in a distorted signal.
can be transferred to the outputs through the cross-
fader and then through the master fader.
19b1
(see "Menu reference" on page 17).
pair. When the indicators for these keys are lit
PHONO/LINE
switches for 1 and 2
PHONO/LINE
,
20b2
,
21b3
and
PHONO/
switch has
Advertisement
Table of Contents
