Microtek ScanWizard Pro Reference Manual page 89

6. 6. 6. 6. 6. Using CMYK or RGB values as "Fr Using CMYK or RGB values as "Fr Using CMYK or RGB values as "Fr
Using CMYK or RGB values as "Fr Using CMYK or RGB values as "From" and "T
can be done in one of the following ways: can be done in one of the following ways:
can be done in one of the following ways: can be done in one of the following ways: can be done in one of the following ways:
• Define such requirement in the CMS Setup
• Click on the expansion arrow provided in the Selective Color
Then proceed to set Fr Fr Fr Fr From
Note that changes to LCH settings remain visible as you manipulate colors in
CMYK/RGB mode.
Click button to
NEW
correct additional
color
Click
delete a selected
box.
om and T T T T T o o o o o settings as it were done under LCH mode. om om
om
button to
DEL
Add To & From colors by clicking the
Enable/Disable selected color by clicking on check
color
mark
Delete selected color (enclosed in a frame) by clicking
button
DEL
Click any of the From (left) or To (right) colors to
redefine the "From" settings of the particular color
om" and "T om" and "T o" Selective colors. This o" Selective colors. This
om" and "T om" and "To" Selective colors. This o" Selective colors. This o" Selective colors. This
CMS Setup CMS Setup
CMS Setup CMS Setup dialog box.
Selective Color Selective Color
Selective Color Selective Color dialog
CMYK/RGB expansion arrow
RGB/CMYK select arrow
NEW
Reference: The Settings Window
button.
81