Scanner Control (Power Saving Control) - Microtek ScanWizard Pro Reference Manual

Scanner Control
(Power Saving Control)
Not all Microtek scanner models support scanning lamp power saving feature. If
your Microtek scanner is implemented with this function, you can set the time
for scanning lamp time-out. By default, if the scanner is idled for 15 minutes, the
scanning lamp turns off. The power saving feature extends the service life of the
scanning lamp. To disable power saving function, uncheck the "Auto Power
Saving mode" lamp control check box.
Not all Microtek scanner models support Scanner Control function. If your
scanner is implemented with these functions.
10 Microtek ScanWizard Pro for Windows