Microtek ScanWizard EZ Reference Manual page 113

A.. Checked scan job: Checked scan jobs are the ones that are scanned when
you click the Scan to or Scan button in the Preview window . To check a scan
job, you can either click the Check icon or use the Check button at the
bottom of the Scan Job Queue window .
B Current scan job: This is the current scan job, indicated by a frame around
the title. There may be several defined scan jobs, but only one scan job can
be current. In the Preview window , the current scan job is the one with the
flashing marquee.
C. Image type display: This shows the image type of the scan job .
D. Image size: This is the image size of the scan job.
E Title of scan job: The title of each scan job is shown. T o edit a scan job title,
double-click the title of scan job and type a new name when an edit box
appears.
F . Selected scan job: The selected scan job is the highlighted item. Y o u can
have multiple selected scan jobs, and clicking on a function button (such as
Check or Duplicate) will implement that function on the selected scan job.
G. One-pass Scan for Multiple Scan Jobs: This allows the scanner performs
scanning in a single pass for all the selected scan jobs.
H. Multiple Auto-crop for EZ-Lock Film Holder: This allows the scanner
automatically performs an Auto-crop after scanning multiple films at one
time.
D. Function buttons for controlling scan jobs: These buttons perform a
specific action on the selected scan job. The Duplicate, New, Delete, Check
and Load/Save buttons can be used on multiple selected scan jobs.
E. Thumbnail of prescan image: A thumbnail ( ) appears for the selected
scan job after you click the Prescan button in the Preview window . This
means a prescan image is available for that scan job. This function is
available only in the Reflective mode.
Microtek ScanWizard EZ - Professional Mode Reference Manual 73