Function Buttons; Selecting Multiple Scan Jobs; Editing Multiple Scan Jobs - Microtek ScanWizard Medi Reference Manual

Function Buttons

Selecting Multiple Scan Jobs

The Duplicate, Delete, and Check buttons at the bottom of the Scan Job Queue
window can be used for multiple job selections.
For example, you can select multiple scan jobs, and then click the Delete button
to remove all the jobs simultaneously.
To select multiple scan jobs, press the Ctrl or Shift key and click on the jobs to be
selected.

Editing Multiple Scan Jobs

ScanWizard Medi lets you edit multiple scan jobs at the same time, increasing
your efficiency in using the software.
To edit multiple scan jobs, simply select all the scan jobs to be edited in the Scan
Job Queue window.
To include each scan job for selection, use the Shift + Click combination
(pressing the Shift key while clicking the mouse at the same time). Then perform
the selected editing function.
For instance, you can go to the Settings window and choose an image type that
will apply to all the scan jobs. Another example is to apply a common resolution
setting to all the scan jobs. Simultaneous editing simplifies the scanning process
for you.
Microtek ScanWizard Medi Reference Manual 71