Shift Shaft; Stopper Lever - Yamaha TT-R125(S) Owner's Service Manual

KICK AXLE AND SHIFT SHAFT
EC4B4400

Shift shaft

1. Inspect:
EC4B4500

Stopper lever

1. Inspect:
EC4C5000
ASSEMBLY AND INSTALLATION
Segment
1. Install:
NOTE:
Align the notch a on the segment with the
G
pin b on the shift cam.
Tighten the screw using the T30 bit.
G
Stopper lever
1. Install:
NOTE:
Align the stopper lever roller with the slot on
segment.
4 - 55
Shift shaft 1
G
Bend/damage → Replace.
Spring 2
G
Broken → Replace.
Stopper lever 1
G
Wear/damage → Replace.
Torsion spring 2
G
Broken → Replace.
Segment 1
G
Screw (segment) 2
G
12 Nm (1.2 m · kg, 8.7 ft · lb)
LT
Stopper lever 1
G
Bolt (stopper lever) 2
G
10 Nm (1.0 m · kg, 7.2 ft · lb)
LT
Torsion spring 3
G
ENG