Yamaha TTR90(M) Owner's Service Manual page 254

FRONT FORK
REMOVAL POINTS
Inner tube
1. Remove:
Bolt (damper rod)
NOTE:
While holding the damper rod with the damper
rod holder 1 and T-handle 2, loosen the bolt
(damper rod).
Damper rod holder:
YM-01300/90890-01294
T-handle:
YM-01326/90890-01326
EC555000
ASSEMBLY AND INSTALLATION
1. Install:
Oil seal 1
NOTE:
Press the oil seal into the outer tube with fork
seal driver weight 2 and fork seal driver
attachment 3.
Fork seal driver weight:
YM-33963/YM-01442/90890-01184
Fork seal driver attachment:
YM-1369/90890-01186
2. Fill:
Fork oil
Oil quantity:
64 cm
Recommended oil:
Fork oil 15W or equivalent
3. After filling up, slowly pump the fork up
and down to distribute the fork oil.
5 - 8
CHAS
3
(2.26 Imp oz, 2.16 US oz)