Set Clock - Yamaha WR250X Owner's Manual

1
1. Tripmeter A indicator " "
1
1. Tripmeter B indicator " "
TIP
Indicator " " comes on when tripmeter
A is selected, and indicator "
on when tripmeter B is selected.
If the fuel level warning light comes on
INSTRUMENT AND CONTROL FUNCTIONS
(see page 3-2), the display will auto-
matically change to the fuel reserve
tripmeter mode "F" and start counting
the distance traveled from that point. In
this case, push the "SELECT 2" button
to switch the display between the vari-
ous tripmeter and odometer modes in
the following order:
fuel reserve tripmeter "F" → odometer
→ tripmeter A → tripmeter B → fuel re-
serve tripmeter "F"
TIP
The fuel level warning light may not
function accurately while riding off road
as the fuel level reading changes due to
the movement and inclination of the ve-
hicle.
If the fuel level warning light comes on
while riding in the measurement mode,
change to the basic mode and push the
"SELECT 2" button to display the fuel
reserve tripmeter.
TIP
To change from the measurement
" comes mode to the basic mode, the stopwatch
and the distance-compensation tripme-
ter must be stopped.
1. Fuel reserve tripmeter "F"
To reset a tripmeter, select it by push-
ing the "SELECT 2" button, and then
push the "RESET" button for at least
one second. If you do not reset the fuel
reserve tripmeter manually, it will reset
itself automatically and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).
Clock
The clock displays when the key is
turned to "ON".
To set the clock
1. Push the "SELECT 1" button for at
2. When the hour digits start flashing,
3-5
1
least two seconds.
2
3
4
5
6
7
8
9