Tail/Brake Light - Yamaha WR250X Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
gether with the headlight unit by
removing the bolts and pulling up-
ward as shown.
1
1
2
3
4
1. Bolt
5
2. Disconnect the headlight coupler,
and then remove the bulb cover.
6
7
8
9
1. Headlight coupler
2. Bulb cover
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1
1
1. Headlight bulb holder
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
1
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight cowling (to-
gether with the headlight unit) by
2
placing it in the original position,
and then installing the bolts.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.

Tail/brake light

This model is equipped with an
LED-type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
6-34
EAU24181