Yamaha WR450F Owner's Manual page 20

INSTRUMENT AND CONTROL FUNCTIONS
TIP
Starting measurement consists of the
following two starts, either of which can
1
be selected.

Manual start
2 Starting measurement by the rider
himself operating the button. (A
long push on the "SLCT 2" button
3
will put measurement on standby.)

Auto start
4
Starting timer measurement auto-
matically on detection of the move-
ment of the machine. (A long push
5
on the "SLCT 1" button will put
measurement on standby.)
6
Manual start
7
The manual start is the default setting
for the stopwatch. The stopwatch indi-
8
cator " " and the distance-compensa-
tion tripmeter indicator " " will start
9 flashing.
1. Push the "RST" button to start the
stopwatch.
2. Push the "SLCT 1" button and
"SLCT 2" button together to stop
the stopwatch.
3. To resume stopwatch counting,
push the "SLCT 1" button and
"SLCT 2" button together.
To reset the stopwatch to zero,
push the "RST" button for at least
two seconds.
TIP
The stopwatch will continue counting
when the vehicle is stopped. To stop
and/or resume counting, repeat steps 2
and 3.
3-5
Auto start
1. Push the "SLCT 1" button for at
least two seconds to set the auto
start.
TIP
When the stopwatch is set to auto start,
the stopwatch indicator " " and the
distance-compensation tripmeter indi-
cator " " will start flashing, and the dig-
its in the display will start scrolling from
left to right.
2. When the vehicle starts moving,
the stopwatch will start counting.
3. Push the "SLCT 1" button and
"SLCT 2" button together to stop
the stopwatch.
4. To resume counting, push the
"SLCT 1" button and "SLCT 2" but-