Handlebar Switches - Yamaha WR450F Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Handlebar switches

Left
1
1
2
3
2
4
3
5
1. Dimmer switch " /
2. Turn signal switch "
6
3. Horn switch " "
Right
7
1
8
9
2
1. Engine stop switch "
2. Start switch " "
EAU1234B
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
"
/ "
Horn switch "
Press this switch to sound the horn.
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch " "
/ "
Push this switch to crank the engine
EAU12400
/ "
" for the high
" for the low beam.
EAU12460
/ "
". To signal a left-hand
". When re-
EAU12500
"
EAU12660
/ "
" before starting
" to
EAU12711
3-7
with the starter. See page 5-1 for start-
ing instructions prior to starting the en-
gine.
The engine trouble warning light will
come on when the main switch is
pushed to "ON" and the start switch is
pushed, but this does not indicate a
malfunction.
EAU52440