TRENDnet User's Guide
Installation
Software Installation
This section describes how to install the driver and utility for the
.
Band USB Adapter
1. Insert the Utility and Driver CD-ROM into your computer's CD-ROM Drive and then
click Install Utility.
2. Follow the InstallShield Wizard Instructions
3. Click Finish to restart the computer.
© Copyright 2012 TRENDnet. All Rights Reserved.
Hardware Installation
1. Plug the
computer.
N300 Wireless Dual
2. Verify that the LED is turned on. Continue to the next section on how to configure
that wireless adapter.
N300 Wireless Dual Band USB Adapter
TEW-664UB
into an available USB slot on your
3