Ip Blocking - TRENDnet AC750 User Manual

TRENDnet User's Guide
4. Review the settings under LAN Client Filter Rules section. Click Apply to save settings.
• Enable: Click to enable rule.
• Policy Name: Enter the name of the rule you would like to assign.
• Schedule: Select the defined schedule you would like to have the rule to be applied
(see "Create Schedule" section on page 34).
• Client IP Address: Enter the IP addresses or IP range to apply the rule.
• Rule Define: Select the rule type.
o Special Services: Select this option to select predefined services.
o User Define: Select this option to manually assign the TCP and UDP ports
© Copyright 2013 TRENDnet. All Rights Reserved.

IP blocking

Advanced > Security > Access Control
You may want to block certain IP addresses or a range of IP address access to your
network.
1. Log into your router management page (see
on page 15).
2. Click on the Advanced tab.
3. Click on the Security section and click on Access Control.
4. Review the settings under LAN Client Filter Rules section. Click Apply to save settings.
• Enable: Click to enable rule.
TEW-810DR
"Access your router management page"
21