Product Hardware Features - TRENDnet AC750 User Manual

TRENDnet User's Guide
Backward Compatible
Compatible with Wireless N and older Wireless G devices
Energy Savings
Embedded GREENnet technology reduces power consumption by up to
50%
IPv6
IPv6 network support
*For maximum performance of up to 433 Mbps use with at least a 433 Mbps 802.11ac
wireless adapter. Maximum wireless signal rates are referenced from IEEE 802.11
theoretical specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions
© Copyright 2013 TRENDnet. All Rights Reserved.

Product Hardware Features

Rear View
LAN Ports 1-4
Internet Port
Reset Button
• LAN Ports 1-4: Connect Ethernet cables (also called network cables) from your
router LAN ports to your wired network devices.
• Internet Port: Connect an Ethernet cable from your router Internet port to your
modem.
• Reset Button: Press and hold this button for 10 seconds to reset the router.
• On/Off Power Switch: Push the router On/Off power switch to turn your router
"On" (Inner position) or "Off" (Outer position).
• Power Port: Connect the included power adapter from your router power port and
to an available power outlet.
• WPS Button (Wi-Fi Protected Setup): Push and hold this button for 5 seconds to
activate WPS. The Power LED will blink when WPS is activated.
TEW-810DR
WPS Button
Power Port
On/Off Power Switch
5