Honda GLH125 SH Owner's Manual page 35

11/05/07 10:05:48 32KVCC00_035
3. Apply the brake several times and check
for free wheel rotation after the brake
lever is released.
After adjustment, push the brake arm ( )
to confirm that there is a gap between the
lower adjusting nut ( ) and the brake arm 2
pin ( ). 6
(2)
(2) Lower adjusting nut
(6) Brake arm pin
After adjustment, confirm the freeplay of
the brake lever.
If proper adjustment cannot be obtained by
7 this method, see your dealer.
Other Checks:
Check the brake cable for kinks or signs of
wear that could cause sticking or failure.
(7)
L ubricat e t he bra ke cable w it h a
commercially available cable lubricant to
prevent premature wear and corrosion.
Make sure the brake arm, spring and
fasteners are in good condition.
(6)
(7) Brake arm
25