Draytek Vigor 2925 Series User Manual page 283

This page allows you to create several profiles, enable the function and specify general
settings for LDAP server.
Available settings are explained as follows:
Item
Enable
Bind Type
Server IP Address
Destination Port
Use SSL
Regular DN
Description
Check to enable such function.
There are three types of bind type supported.
Simple Mode – Just simply do the bind authentication without
any search action.
Anonymous – Perform a search action first with Anonymous
account then do the bind authentication.
Regular Mode– Mostly it is the same with anonymous mode.
The different is that, the server will firstly check if you have
the search authority.
For the regular mode, you'll need to type in the Regular DN
and Regular Password.
Enter the IP address of LDAP server.
Type a port number as the destination port for LDAP server.
Check the box to use the port number specified for SSL.
Type this setting if Regular Mode is selected as Bind Type.
271 Vigor2925 Series User's Guide