Protocol
Interface
Interface Address
Src IP Start
Src IP End
Dest IP Start
Dest IP End
Dest Port Start
Dest Port End
Move UP/Move Down
Click Index 1 to access into the following page for configuring load-balance policy.
Available settings are explained as follows:
Item
Enable
Vigor2925 Series User's Guide
Display the protocol used for this policy.
Display the interface to send packets to once the policy is
matched.
Display the WAN IP or WAN IP alias address which is
used as source IP of the outgoing packets.
Displays the IP address for the start of the source IP.
Displays the IP address for the end of the source IP.
Displays the IP address for the start of the destination IP.
Displays the IP address for the end of the destination IP.
Displays the IP address for the start of the destination port.
Displays the IP address for the end of the destination port.
Use Up or Down link to move the order of the policy.
Description
Check this box to enable this policy.
170