Radiator hose 2
Radiator breather hose
Throttle cable (pull)
Throttle cable (return)
Engine stop switch lead
Bracket (CDI unit)
Put a cover over the ignition coil.
Pass the throttle cables through
the cable guide.
Pass the throttle cable over the
radiator mounting boss. Cross
the throttle cable behind the ra-
Pass the throttle cables on the
outside of the ignition coil.
Insert the engine stop switch
lead into the CDI unit band.
Align the coupler lower end with
the band lower end.
CABLE ROUTING DIAGRAM
Fit the hole in the CDI unit band
over the CDI unit bracket.