American Dynamics RAS915LS Operator's Manual page 99

Table E-1: Quick Set Menu commands
Quick Set Command / Menu Item
0+
1+
2+
3+
4+
15+
16+
17+
20+
Note: You can access any quick set feature by entering the menu number and pressing
After a selection is made, the Quick Set menu automatically closes. To close the menu without
selecting a menu item, press
AD Up-the-Coax (UTC) Protocol Command Summary
: Toggle Quick Set Menu
: Dome Config Menu
: Auto Iris/Auto Focus
: Flip
: Peel Pattern
: Smooth Scan
: Stepped Scan
: Random Scan
: Dome Information
Description
Toggles between displaying and hiding the quick set
menu.
Displays the SpeedDome Ultra configuration menu.
Refer to the dome manual for information about the
available settings.
Resumes Auto Focus/Auto Iris mode.
Rotates the SpeedDome 180° from its current pointing
direction. This is the same as pressing the Flip button.
Runs the default Apple Peel Pattern continuously.
Initiates a smooth scan between the left and right scan
limits, starting at the left scan limit. If no scan limits
have been set, initiates a smooth 360° clockwise
rotation around the dome axis using the current tilt,
zoom and focus settings.
Initiates a scan between the left and right scan limits
pausing briefly every 10° (at 1x zoom), starting at the
left scan limit. When the right scan limit is reached,
the scan is reversed. If no scan limits have been set,
initiates a clockwise rotation around the dome axis
pausing briefly every 10° (at 1x zoom) for 3 seconds
using the current tilt, zoom and focus settings.
Initiates a scan between the left and right scan limits
pausing randomly between the limits. If no scan limits
have been set, initiates a clockwise or counter-
clockwise rotation around the dome axis using the
current tilt, zoom and focus settings. The dome pauses
randomly as it rotates around the axis.
Displays the Dome Information screen available
through the dome configuration menu.
.
.
E–5