Panasonic Utc Command Summary - American Dynamics RAS915LS Operator's Manual

Panasonic UTC Command Summary

The following table lists the commands to operate the configuration utility when the dome is installed
in a Panasonic UTC environment.
If you want to ...
Start the configuration utility.
Move the highlight bar on the active menu.
Select the highlighted item on the active menu.
Increase the value of the selected setting. For example, Red or
Blue white balance values.
Decrease the value of the selected field. For example, Red or
Blue white balance values.
Display the next choice for the setting. For example,
Maximum Zoom setting.
Display the previous choice for the setting. For example,
Maximum Zoom setting.
Adjust dome position during menu programming.
Setting Names / Working with Passwords
When setting names or entering password information, the screen displays the available characters in
the selected languages. In these situations, the following commands are used:
If you want to ...
Move the highlight left or right in the character field.
Move the highlight up or down in the character field.
Select the highlighted character in the character field.
Move the cursor to the right of the current character in the
name or password.
Move the cursor to the left of the current character in the
name.
Panasonic Up-the-Coax (UTC) Protocol Command Summary
Use ...
Camera Set ON
Set Up/Esc + Camera
Up/Down
SET
Joystick Right
Joystick Left
Joystick Right
Joystick Left
ALT
Use ...
ALT enabled, Left/Right
ALT enabled, Up/Down
SET
ALT disabled, Right
Or
ALT enabled, Zoom Tele
ALT disabled, Left
Or
ALT enabled, Zoom Wide
D–3