Invacare 9000 SL User Manual page 82

11 RECLINER
Installing I.V. Rod Support Tube
 The I.V. rod holder MUST already be mounted
to the side frame of the wheelchair.
1. Insert the I.V. rod support tube into the rear cylinder of the I.V. rod
holder.
 When installing the I.V. rod support tube, ensure
the adjustment knob is pointing out away from the
wheelchair.
2. Turn the I.V. rod support tube until the holes in the I.V. rod support
tube align with the holes in the rear cylinder of the I.V. rod holder.
3. Insert mounting screw through rear cylinder, large nylon washer,
small nylon washer, steel washer, and into locknut. Securely tighten.
The large nylon washer MUST be inserted into

hole and pressed in so that it is flush with outside
surface of rear cylinder.
4. Reinstall the rear wheel from the wheelchair. Refer to
Removing/Installing Rear Wheels on page 77.
5. Adjust I.V. rod to desired height. Refer to Adjusting I.V. Rod on
page 82.
Adjusting I.V. Rod
1. Loosen adjustment knob.
2. Adjust I.V. Rod to desired height.
3. Securely tighten adjustment knob.
Invacare® 9000 Series Wheelchair
 Attaching
hardware enlarged
3X scale for
clarity.
Locknut
Small Nylon
Washer
Large Nylon
Washer
Cylinder
Mounting Screw
FIGURE 13 Installing I.V. Rod Support Tube - Adjusting I.V.
82
I.V. Rod
Steel
Washer
Rear
Rod
Part No. 1056953
Adjustment
Knob
I.V. Rod
Support
Tube
I.V. Rod
Holder