Invacare 9000 SL User Manual page 50

6 ARMS
6. Repeat STEP 5 for the opposite side of the wheelchair.
7. Install the new arms onto the wheelchair. Refer to Removing or Replacing Armrest on page 48.

The
rear wheel axle spacer is needed for conventional arms. It is not needed for spacer saver arms.
8. For conventional arms, refer to Removing/Installing Rear Wheels on page 55.
Space Saver Arm Position
Arm Socket (Inside of
Wheelchair Frame)
Locknut
Left Side of
Wheelchair Frame
Invacare® 9000 Series Wheelchair
Hex Screw
Wheelchair Frame
FIGURE 5 Converting Between Space Saver and Conventional Arms
Arm Socket (Outside of
Wheelchair Frame)
Locknut
Right Side of
Wheelchair Frame
50
Conventional Arm
Position
Hex Screw
Part No. 1056953