Removing Or Replacing Armrest - Invacare 9000 SL User Manual

9000 series
Table of Contents

Advertisement

6 ARMS
6.3

Removing or Replacing Armrest

WARNING
9000XDT: Use only heavy duty, fixed height armrests on 9000XDT wheelchairs. Otherwise injury or damage may occur.
Make sure the armrest release lever is in the locked position before using the wheelchair.
This procedure does not apply to 9000 SL wheelchairs equipped with space saver arms.
Removing Armrests
1.
Unlock the armrest by turning the armrest release levers towards
the outside of the wheelchair.
2.
Lift armrest completely out of arm sockets from the wheelchair.
Replacing Armrests
Armrest release lever MUST be in the unlocked
position when placing armrest into the arm
sockets.
1.
Place armrest into arm sockets located on the side of the
wheelchair.
2.
Lock the armrest by turning the armrest release levers towards the
inside of the wheelchair.
Invacare® 9000 Series Wheelchair
Rear Arm
Post
Armrest Release
Lever
Arm Socket
FIGURE 3 Removing or Replacing Armrest
48
Armrest
Armrest Release
Lever
Arm Socket
Part No. 1056953

Advertisement

Table of Contents
loading

This manual is also suitable for:

9000xt recliner9000 xdt

Table of Contents