Maintenance - Invacare 9000 SL User Manual

4 SAFETY INSPECTION/TROUBLESHOOTING
4.3

Maintenance

Maintenance Safety Precautions
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise
injury or damage may result.
Replace any labels that are missing, worn, or torn. Refer to Label Locations on page 8 for a listing of the labels and their
locations.
CAUTION
DO NOT overtighten hardware attaching to the frame. This could cause damage to the frame tubing.
Suggested Maintenance Procedures
1. Before using your 9000 Series wheelchair, make sure all nuts and bolts are tight.
2. Check all parts for damage or wear and replace.
3. Check all parts for proper adjustment.
4. 9000 SL/9000 XT ONLY - Keep quick-release axles free of dirt and lint to ensure positive locking and proper operation. Refer to Adjusting
Quick-Release Axle on page 58.
5. 9000 SL/9000 XT ONLY - Oil quick-release axles at least once a month (3-in-1 oil
WARNING
Do not use the wheelchair unless it has the proper tire pressure (p.s.i.).
DO NOT overinflate the tires. Failure to follow these suggestions may cause the tire to explode and cause bodily harm.
The
recommended tire pressure is listed on the sidewall of the tire.
Invacare® 9000 Series Wheelchair
® or equivalent).
36
Part No. 1056953