10 ANTI-TIPPERS/WHEEL LOCKS
Refer to Detail "B" in FIGURE 2 and to the following charts to ensure the correct anti-tipper is installed in the wheelchair.
Seat-to-Floor heights are approximate depending on front caster size and type. Anti-Tipper length measurement is taken
with the extension tube in the longest position available.The anti-tipper height measurement MUST be taken with the
anti-tipper on a flat surface.
CASTER SIZE
SEAT-TO-FLOOR HEIGHT
6-inch
13½ and 14½ inches
CASTER SIZE
SEAT-TO-FLOOR HEIGHT
8-inch
17½ and 19½ inches
8-inch
21½-inches
CASTER SIZE
SEAT-TO-FLOOR HEIGHT
8-inch
17½, 18½ inches
6-inch
16½, 17½-inches
15½-inches
Invacare® 9000 Series Wheelchair
9000 XT (SUPER LOW FRAME)
ANTI-TIPPER LENGTH/HEIGHT
10½ / 2-inches
9000 XDT (ADULT TALL FRAME)
ANTI-TIPPER LENGTH/HEIGHT
11-5/8 / 2-3/4-inches
13½ / 3½-inches
9000 XT WITH 0° SEAT-TO-FLOOR ANGLE (ADULT/HEMI FRAME)
ANTI-TIPPER LENGTH/HEIGHT
13½ / 3½-inches
13½ / 3½-inches
11-5/8 / 2-3/4-inches
ON CHAIR
1360SH
ON CHAIR
1360A
1360
ON CHAIR
N/A
N/A
N/A
64
OFF CHAIR KIT NUMBER
1064520
OFF CHAIR KIT NUMBER
1058752
1058836
OFF CHAIR KIT NUMBER
1058836
1058366
1058752
Part No. 1056953