Using/Adjusting Disk Wheel Locks - Invacare 9000 SL User Manual

9000 XT WITH 3° SEAT-TO-FLOOR ANGLE AND 9000 SL (ADULT/HEMI FRAMES)
CASTER SIZE SEAT-TO-FLOOR HEIGHT
8-inch 17½, 18½, 19½-inches
6-inch 15½, 16½, 17½-inches
CASTER SIZE SEAT-TO-FLOOR HEIGHT
8-inch 17½, 18½, 19½-inches
6-inch 16½, 17½-inches
15½-inches

10.2 Using/Adjusting Disk Wheel Locks

Using Patient Operated Disk Wheel Locks
WARNING
DO NOT attempt to stop a moving wheelchair with wheel locks. Wheel locks are not brakes.

Position wheelchair on a flat, level surface to perform this procedure.
1. Ensure the wheelchair is not moving before engaging the wheel locks.
2. Depending on the model of wheel lock installed on the wheelchair, perform one of the following:
• Push-to-Lock - To engage, push the wheel lock handle forward.
• Pull-to-Lock - To engage, pull the wheel lock handle backward.
Part No. 1056953
ANTI-TIPPER LENGTH/HEIGHT
13½ / 3½-inches
11-5/8 / 2¾-inches
9000 XT WITH 6° SEAT-TO-FLOOR ANGLE (ADULT/HEMI FRAME)
ANTI-TIPPER LENGTH/HEIGHT
13½ / 2-7/8-inches
12½ / 2¾-inches
9½ / 2-3/8-inches
10 ANTI-TIPPERS/WHEEL LOCKS
ON CHAIR
1360
1360A
ON CHAIR
N/A
N/A
N/A
65
OFF CHAIR KIT NUMBER
1058836
1058752
OFF CHAIR KIT NUMBER
1113766
1113765
1113764
Invacare® 9000 Series Wheelchair