Seat And Arms; Removing/Installing The Seat - Invacare Leo User Manual

7 Seat and Arms

WARNING
After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely -
otherwise injury or damage may result.
Before performing any maintenance, adjustment or service, turn power off and remove key from ignition.
 Refer to Product Labeling on page 17 for pinch point location.
7.1

Removing/Installing the Seat

WARNING
Before use, ensure that the seat is in the locked position. The seat lever MUST be pulled up all the way to allow the seat to
drop into the locked position. Otherwise, a fall from the scooter could occur causing bodily injury and/or damage to the
scooter.
 For this procedure, refer to FIGURE 7.1 on page 34.
Removing
1. Pull up the seat lock lever.
2. Turn the seat to one side.
3. Hold the seat assembly firmly by the backrest and the front edge of
the seat.
4. Lift the seat assembly up and away from the seat post.
Part No. 1163141
Installing
1. Pull up the seat lock lever.
2. Lower the seat assembly onto the seat post.
3. Turn the seat so it faces forward and locks into position.
4. Lift up on seat assembly to ensure the seat is secure.
33
7 SEAT AND ARMS
Invacare® Leo™ Scooter