Invacare Tracer SX5 User Manual page 73

3. Reposition the wheel lock so that when engaged, the wheel lock shoe embeds the tire
occupied wheelchair in place when pushed.
4. Securely tighten the bolt and locknut or socket screws securing the wheel lock to the wheelchair frame.
5. Engage the wheel lock.
6. Measure the distance the wheel lock is embedded into the tire as shown in DETAIL "A".
 Any wheel lock adjustment should embed the
wheel lock shoe at least 1/8-inch (3/16-inch if
pneumatic tire) into the tire when engaged.
7. Repeat STEPS 1-6 until the wheel lock shoe embeds the tire
1/8-inch (3/16-inch for pneumatic tires) and holds the occupied
wheelchair in place when pushed.
8. Repeat STEPS 1-7 for the opposite wheel lock.
9. Engage both wheel locks and ensure the occupied wheelchair is held
in place when pushed.
WARNING
If wheel locks DO NOT hold the occupied
wheelchair in place contact a qualified technician.
Part No. 1110550
1
/ inch (
8
Wheel
Lock
Bolt and
Locknut
Wheel
Lock
Rear Wheel
FIGURE 8 Using/adjusting the Clamp-On Wheel Locks -
Adjusting the Clamp-On Wheel Locks
73
3
/ inch for pneumatic tires) and holds the
16
DETAIL "A" - WHEEL
Wheel Lock
LOCK SHOE
Handle
ENGAGEMENT
® ®
Invacare Tracer SX5 Wheelchair
12 RECLINER
1/8 inch
(3/16 inch
pneumatic
tires)
Wheel
Lock
Shoe
Tire