Invacare Tracer SX5 User Manual page 30

4 SAFETY INSPECTION/TROUBLESHOOTING
❑
Check pneumatic tires for proper inflation.
WARNING
As with any vehicle, check the wheels and tires periodically for cracks and wear. Replace if damaged.
❑ Check that there is no excessive side movement or binding in the rear wheels when lifted and spun.
❑
Inspect rear wheels for cracked, bent or broken spokes.
❑ Ensure all spokes are uniformly tight.
❑ Inspect handrims for signs of rough edges or peeling.
❑
Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑
Check headtube locknuts for tightness.
❑ Inspect casters for cracks and wear.
❑ Inspect front casters for cracked, bent or broken spokes.
❑ Clean upholstery and armrests with mild soap and water.
❑
Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Weekly
❑ Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑
Inspect tires for flat spots and wear.
❑ Check pneumatic tires for proper inflation.
❑ Inspect rear wheels for cracked, bent or broken spokes.
❑ Ensure all spokes are uniformly tight.
❑
Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑ Inspect front caster for cracked, bent or broken spokes.
® ®
Invacare Tracer SX5 Wheelchair
30
Part No. 1110550