Invacare Tracer SX5 User Manual page 40

6 ARMS
Replacing
1. Perform STEPS 1-2 above to flip the armrest back.
2. Remove hex screw, spacer and locknut securing the EXISTING armrest and insert to the wheelchair frame.
3. Remove the EXISTING armrest from frame.
4. Inspect rear tube of new armrest to ensure insert is properly installed with mounting holes aligned.
5. If not properly aligned, rotate the insert using a flat screwdriver to align the mounting holes.
® ®
Invacare Tracer SX5 Wheelchair
Armrest Rear
Tube
Armrest
Rear Tube
Nut
FIGURE 1 Using or Replacing Flip-Back Armrest
Armrest Release Button
Armrest Front
Tube
Arm Socket
Armrest Mounting Bracket
Spacer
40
(Front or Back of the
Armrest Front Tube)
Inside of
Chair
Hex Screw
Part No. 1110550