Invacare Tracer SX5 User Manual page 61

3. If necessary, replace the front casters and forks with the casters and forks indicated in the chart. Refer to replacing front casters and
installing/replacing fork assemblies in section 7 of this manual.
4. Reinstall the rear wheels onto the wheelchair in the mounting position indicated in the chart. Refer to one of the following procedures.
A. Adult/Hemi Frame Style - Refer to Removing/Installing Rear Wheels on page 49.
B. Recliner Frame Style - Refer to Removing/Installing the Rear Wheels on page 71.
5. Adjust anti-tippers according to new seat-to-floor height. Refer to adjusting the anti-tippers in section 8 of this manual.
Non-Recliner Frame Style
WARNING
20-22 Wide (300 lb. weight limitation) Wheelchairs only: 8 x 1
NOT replace with any other size/style front caster. Otherwise, injury or damage may occur.
6-INCH FRONT CASTERS
SEAT-TO-FLOOR FRONT CASTER
HEIGHT MOUNTING
(IN INCHES) POSITION
1
15 /
2
1
16 /
MIDDLE
2
1
17 /
BOTTOM
2
1
17 /
BOTTOM
2
Part No. 1110550
REAR REAR WHEEL
WHEEL MOUNTING
SIZE POSITION
TOP 20 inch
22 inch
24 inch
20 inch BOTTOM
3
/ inch semi-pneumatic front casters MUST be installed. DO
4
SEAT-TO-FLOOR
HEIGHT
(IN INCHES)
1
17 /
TOP
2
1
17 /
TOP
2
1
18 /
TOP
2
1
19 /
2
61
11 SEAT TO FLOOR
8-INCH FRONT CASTERS
FRONT REAR
CASTER WHEEL
MOUNTING SIZE
POSITION
TOP 20 inch
TOP 24 inch
MIDDLE 22 inch
BOTTOM 24 inch
®
Invacare Tracer
REAR WHEEL
MOUNTING
POSITION
BOTTOM
TOP
BOTTOM
BOTTOM
®
SX5 Wheelchair