Installing Dlt Drives - HP Surestore Tape Library Model 20/700 Installation Instructions Manual

Installing DLT Drives

For DLT drives, follow the procedure below to unpack and install the drives.
DLT tape drives are shipped with the following, non-selectable configurations:
• DLT8000 (manufacturer's model number)
• Differential operation
Refer to Figure 2 and make sure that the labels on the drive match the drive type and
operation required.
Figure 2. DLT Labels
DLT Labels (H_65115)
1. Manufacturer's model number label
2. Differential label (and drive serial number)
NOTE:Check with the customer for their maintenance agreement on tape drives. If
the customer agreement is to return the drives for repair, have them retain
one shipping box, with packing material, to be sent back to the factory.
62114 6