HP Surestore Tape Library Model 20/700 Installation Instructions Manual page 11

Optional Drive Column 1 Connectors
NOTE:This section applies to the 20/700 tape library only.
1.
2. Repeat the steps in the section above to install the channel connectors and drive connec-
3. Place the drive power switch(es) to the ON (|) position.
4. When all connectors are in place, close and lock the small access door.
Open the small access door (located on the frame member between the two drive columns) for the
column 1 drive connectors by turning the five snap rings counterclockwise.
tors.
62114 11