HP Surestore Tape Library Model 20/700 Installation Instructions Manual page 15

Turning the System Over to the Customer
After the DLT drive has been installed and all testing has been completed, it is time to turn
the system over to the customer. Follow these steps:
1. Place the drive online (see Chapter 4 of the Installation Manual).
2. Return to the library installation documentation and complete the library install, if applica-
ble.
NOTE:Library configuration must be updated to identify DLT drives and
3. Give the DLT 8000 Tape System Product Manual to the customer.
4. Provide the operator with training on the DLT drive.
5. Provide training on how to place a service call.
cartridge arrays may need to be installed.
62114 15