HP NetServer AA 4000 Release Note page 23

Software Installation on the
Step Action
1 Power off the CE if you want to remove the
keyboard, mouse, and monitor if the CE
computers do not require them to complete
POST.
If you powered off the CE, power it back on
and allow it to complete POST.
• In the HP NetServer AA Solution Installation Guide
Software Installation on the
Step Action
2. Remove any Ethernet adapter drivers from
the CE.
Note: After you add this step to the table, increase by 1 all the step numbers after this
additional step.
• In the HP NetServer AA Solution Installation Guide
the Ethernet Redirector, replace Step 2 with the following, which indicates that you
perform this step on the CE:
Step Action
2. On the CE, install the Ethernet Redirector.
a. Using the Control Panel, Network icon, click the
Adapters tab.
b. Select Add, then Have Disk.
c. Type cdrom_drive:\EthR (for example,
E:\EthR).
CEs, change Step 1 in the table to read:
Notes
The server allows you to share a keyboard, mouse,
and monitor between the IOPs and CEs.
CEs, insert the following step in the table after Step 1:
Notes
Do this after the CE boots.
HP NetServer AA Solution Release Notes
on page 58, in the section
on page 59 in the section Installing
Notes
Be sure to enter Network Properties from
within the CE Desktop window.
Completing
19